Cineversum | Passive 3D Kit for Blackwing

The new Blackwing MK2013 Series are perfect projectors for any home theatres. They combine extreme native contrast with the 4k-Interpolation engine that boosts the perceived resolution up to 3840 x 2160 pixels.

The Passive 3D Kit is an absolute upgrade for 3D enthusiasts and spectators who are 3D sensitive. Thanks to the use of passive 3D technology and the lightweight, flicker-free glasses, the stereoscopic picture is 50% brighter than with the active sets but also smoother and more natural to the eyes.

Main Page

Range Overview

Cine-Twist Kit

Passive 3D Kit

Passive 3D Kit for Blackwing Series

Easy to use and a child’s play to set up
No more IR of RF interferences due to 3D syncro emitter
Only one projector is necessary to create the 3D effect
New throw ratio with the Passive 3D kit equipped is 1.6:1 - 2.8:1
The Passive 3D Kit mk2013 is not compatible with MK2011 and MK2012 models

Highest contrast of the market for 3D projection
Smooth and more comfortable image (no headache, no eye strain)
High brightness in 3D mode (50% brighter than the active 3D mode)
Richer and more natural colors

Lightweight, cost-effective, heavy-duty glasses (no electronic, no batteries)
Clip-On item for customers who wear viewing glasses

Easy to install

Tighten only three screws to install the Passive 3D kit. Then just follow the simple steps from the installation guide and be ready for an incredible 3D experience.

Passive 3D Glass

The Passive 3D Kit comes with 4 passive 3D glasses. The passive 3D glass is extremely comfortable thanks to its light weight and the flicker-free technology.

Major reasons to upgrade to Passive 3D

As far as the spectators are concerned, there’s an immediate benefit to Passive 3D over Active 3D: the weight of the glasses. Thanks to the absence of embedded electronics and battery, the 3D glasses are ten times lighter than the active 3D ones. Besides, Cineversum can also supply the Clip-On item to customers who already wear viewing glasses. They weight 1 gram and are literally imperceptible.

The glasses are called “passive” in the sense that there is no active shutter. Thanks to the use of the Passive 3D kit, the perception of the 3D images is smooth. The spectator therefore feels more comfortable. This reduces the eye strain, avoids the headaches or nausea that sometimes disturb a few spectators during the usual active 3D projections. Last but not least, the passive 3D glasses are much cheaper than active ones and they have no battery to replace.

Passive 3D Clip-On

The optional Clip-On can be clipped onto any viewing glasses and it weights less than 1 gram.

Battery-free

The Passive 3D glasses and Clip-On that come with the Cineversum Passive 3D Kit don't use any battery or electronic components.

Innovative Passive 3D solution

Up to now, Passive 3D has generally meant stacking two projectors to produce the stereoscopic effect. This involved a long and hard time to align two images and obtain a good color balance. And of course it also meant twice the budget. Thanks to the Cineversum Passive 3D Kit, this is no longer the case: only one projector is required and necessary to obtain a bright and detailed picture up to 180" diagonal screens (4 meters wide). This results in an unprecedented saving of time and money.

50% brighter than active 3D

The patented Fast Surface Switching Technology developed for the Cineversum Passive 3D kit, generates the stereoscopic modulation with an excellent light efficacy. This exclusive process makes, for the first time, a single projector bright enough to produce a ghost-free 3D picture on large screens.